Hooks on paper Anker

Hooks on paper Anker - wire hooks bonded with paper

Designed for use with a wide range of belts and a wide range of thicknesses up to 10mm.

Single hooks are attached in six points to the paper, which can be easily and quickly cut to the width of the connection.

The paper is used to separate the elements during transport and assembly, then it helps when installing the hooks. It is removed after the connection is installed on the tape.

Hook types:

Type #25

The paper is used to separate the elements during transport and assembly, then it helps when installing the hooks. It is removed after the connection is installed on the tape.

Technical Specifications:

wire diameter: 0.62mm
pitch: 1.70mm
tape thickness up to 2.8 mm
roll diameter 25 mm
horizontally cut arrowheads
double rolled wire
available in the form cut to the width of the tape from 10 to 115 mm and in strips with a length of 150 or 300 mm

Type #30

Specially designed for use
with thin belts
(e.g. filter belts and PTFE coated
high temperature conveyors).

Technical Specifications:

wire diameter: 0.8mm
pitch: 2.54mm
tape thickness up to 2.5 mm
roll diameter 50 mm
horizontally cut arrowheads
double rolled wire
slats 150 or 300 mm long

Type #35

Specially designed for medium duty belts.

Technical Specifications:

wire dimensions: 0.90 x 0.60 mm
pitch: 2.54 mm
tape thickness: up to 2.0 mm
minimum roll diameter: 50 mm
strips with a length of 150, 300 or 600 mm

Type #40

Designed for a variety of applications (e.g. heavy-duty filter belts, ironing felts and corrugating belts).

Technical Specifications:

wire dimensions: 0.90 x 0.70 mm
pitch: 2.54mm
tape thickness: up to 4.0 mm
minimum roll diameter: 25 mm
slats of length: 300 or 600 mm

AP type

Specially designed to achieve flat and non-marking seams in corrugator belts.

Technical Specifications:

wire diameter: 1.2mm
pitch: 3.67mm
tape thickness up to 10 mm
roll diameter 100 mm
slats 300 mm long

Types #2 - #6

Designed for a range of applications in industry, agriculture and logistics.

The most important advantages:

Perfectly fits leather, cotton, PVC-PU drive belts;
Easily and quickly installed using a special mounting strip;
Reliable and durable connection of belt ends;
Abrasion resistant.

Hooks on paper Anker - Technical data:

Hooks	Type #2	Type #3	Type #4	Type #5	Type #6
Tape thickness, mm	1 – 4	3 – 4	5 – 6	6 – 8.5	8.5 – 10
belt strength, N/mm	20	25	thirty	40	45
Min. roll Ø, mm	50	75	100	125	150
hook wire Ø, mm	1.2		1.38
Stroke, mm	3.67

The standard pack contains 12 rows of x 300mm paper hooks, together with a nylon bar. It is also possible to deliver poles made of steel (up to 30 m in one piece). Hooks are available in galvanized steel or AISI 430 stainless steel.

Rod	Ø, mm
stainless steel rod	1.0
	1.5
	1.8
	2.5
stainless steel bar with PA coating	1.5
	2.0
	3.0
stainless steel rope in PA coating	1.5
	2.2
	2.6
	3.6

Information about other products can be found at www.c-t-p.com.pl